1. Home
2.  >
3. Product
4.  >
5. Acrylic Adhesive

Acrylic Adhesive

Acrylic adhesives have excellent environmental resistance and fast-setting times when compared to other resins systems. They are created by polymerizing acrylic or methylacrylic acids through a reaction with a suitable catalyst.

 Advantages of crylic Adhesive

• Excellent bonding strength
• High resistance to oily or untreated surfaces
• Faster curing
• Microsoft to hard bonding
• Small area bonding
• Stable performance and long shelf life long

 

What Is Acrylic Conformal Coating?

Acrylic conformal coating is a type of finish that can be applied to various surfaces. Acrylic conformal coatings are often used in the electronics and medical industries and in other industrial settings where protection from chemicals or water is needed.

 What is the acrylic conformal coating?

Acrylic conformal coating is a type of coating that is typically used in the electronics industry to protect circuit boards and other electronic components from damage. The coating is applied to the element’s surface and cured with UV light. Acrylic conformal coatings are typically clear or amber in colour.

There are several benefits to using an acrylic conformal coating on circuit boards and other electronics:

1. The coating helps to protect the components from damage caused by moisture, chemicals, or other environmental factors.
2. The coating can help to prevent electrical shorts by insulating the element from contact with other conductive materials.

3. The coating can improve the reliability of the electronic component by providing a barrier against dust and other contaminants.

UV Moisture Acrylic Product Selection

Product Seriess	Product name	Product typical application
UV moisture acrylic acid	DM-6496	No flow, UV/moisture curing package, suitable for partial circuit board protection. This product has fluorescent characteristics in ultraviolet (black). It is mainly used for partial protection of WLCSP and BGA on circuit boards.
	DM-6491	No flow, UV/moisture curing package, suitable for partial circuit board protection. This product has fluorescent characteristics in ultraviolet (black). It is mainly used for partial protection of WLCSP and BGA on circuit boards.
	DM-6493	It is a conformal coating designed to provide strong protection from moisture and harsh chemicals. Compatible with industry standard solder masks, no-clean fluxes, metallized components and substrate materials.
	DM-6490	It is a single-component, VOC-free conformal coating. This product is specially designed to quickly gel and cure under ultraviolet light, even if exposed to moisture in the air in the shadow area, it can be cured to ensure the best performance. The thin layer of coating can solidify to a depth of 7 mils almost instantaneously. With strong black fluorescence, it has good adhesion to the surface of various metals, ceramics and glass filled epoxy resins, and meets the needs of the most demanding environmentally friendly applications.
	DM-6492	It is a single-component, VOC-free conformal coating. This product is specially designed to quickly gel and cure under ultraviolet light, even if exposed to moisture in the air in the shadow area, it can be cured to ensure the best performance. The thin layer of coating can solidify to a depth of 7 mils almost instantaneously. With strong black fluorescence, it has good adhesion to the surface of various metals, ceramics and glass filled epoxy resins, and meets the needs of the most demanding environmentally friendly applications.

Product Selection of Double-Component Acrylic Structural Adhesive

Product Seriess	Product name	Product typical application
Double-component Acrylic Structural Adhesive	DM-6751	It is suitable for the structural bonding of notebook and tablet computer shells. It has fast curing, short fastening time, super impact resistance and fatigue resistance. It is an all-rounder of metal adhesives. After curing, it has super impact resistance and fatigue resistance,and can withstand extreme temperatures, and the performance is very superior.
	DM-6715	It is a two-component low-odor acrylic structural adhesive, which produces less odor than traditional acrylic adhesives when applied. At room temperature (23°C), the operating time is 5-8 minutes, the curing position is 15 minutes, and it is usable in 1 hour. After being fully cured, it has the characteristics of high shear, high peeling, and good impact resistance. Suitable for bonding most metals, ceramics,rubber, plastics, wood.
	DM-6712	It is a two-component acrylic structural adhesive. At room temperature (23°C), the operating time is 3-5 minutes, the curing time is 5 minutes, and it can be used in 1 hour. After being fully cured, it has the characteristics of high shear, high peeling, and good impact resistance. Suitable for bonding most metals, ceramics, rubber, plastics, wood.

Selection of UV Moisture Acrylic Conformal Coating Three Anti-adhesive

Product line	Product Series	Product Name		Product Typical Application
UV Moisture Acrylic Acid	Conformal Coating Three Anti- adhesive	DM-6400		It is a conformal coating designed to provide strong protection from moisture and harsh chemicals. Compatible with industry standard solder masks, no-clean fluxes, metallization, components and substrate materials.
		DM-6440		It is a single-component, VOC-free conformal coating. This product is specially designed to quickly gel and cure under ultraviolet light, even if exposed to moisture in the air in the shadow area, it can be cured to ensure the best performance. The thin layer of coating can solidify to a depth of 7 mils almost instantaneously. With strong black fluorescence, it has good adhesion to the surface of various metals, ceramics and glass filled epoxy resins, and meets the needs of the most demanding environmentally friendly applications.